This is going to become of of those staple mods. One that everyone adds to a fresh install and then forgets about because it integrates so well with the world
If you have enough time after completing the mod pack, do you think it would be possible to have a standalone add-on for the pipe weapons? Something like making the attachments, receivers and even the stocks and barrel look more professionally made the higher the gun-nut skill gets as if the user is getting a feel as to what the pipe weapon used to be before it ended up in a sorry state of poor craftsmanship?
You should do something like turning pistols into rifles like you can do with the pipe pistols I only have xbox series x so it would be the first mod of its kind if you did that from what i saw
If you can create an add-on or just replace the receiver on the vanilla 10mm to look a bit more squared off I might stop using FriedTurkey's 10mm and switch to using yours ^.^
I really like these so far. Stoked for the raider/scrap attachments. I’m kinda curious if you’re going to add anything to the pipe guns, even though it’s hardly used.
Do you think you could add a snake shot receiver to the .44 pistol and/or Western Revolver? There aren't a lot of good shotgun pistols for people running the Gunslinger perk and I feel adding snake shot to the afore mentioned weapons would be appropriate.
think with the laser stock we can get a laser mag that adds a drum mag inspired by the laser rcw? just convert a combat rifle into some laser thingy because you can
Hey Dak, I was curious if there was any way I can talk to you privately about a mod project, it is not a request. I don’t know anyone personally in the modding community, but I’ve always been a fan of your channel and your mods, please consider talking with me, I’m sure it will not be a waste of time to you.
This is awesome Dak! I wonder if you will touch upon the laser and plasma rifle. Where you can finally turn it into a tri-beam rifle and classic laser pistol. For plasma turn it into the classic plasma pistol and multiples rifle.
Anyone: Why is the vanilla 10mm Pistol so massive? Everyone: Because it's meant to be carried by Power Armored troops. Me: Bruh… If you in Power Armor then WTF you carrying a pistol for? Chuck that glorified pea-shooter out and get a minigun ffs!
On the laser sights…why didn't you use the laser sight on the bottom of the 10 mils large barrels at all? I was under the impression that those gas-tube looking things were simply laser sights that were out of batteries.
I dunno, maybe I'm crazy. But regardless, you're doing some good work. Happy to see you're still working on this mod. 🙂
My only dissapointment with the 10mm in no full stock option to convert it into a SMG, but either way this looks amazing and will get me to use vanilla weapons for once
big fan of the massive 10mm! i always try to make the 10mm the size of a small rifle with those vanilla parts, and the idea i could make it even bigger… super exciting.
I absolutely love the idea of the junk part mods. that way you're not just jumping straight from pipe weapons to pristine prewar antique guns. I think it'll do a great job to make the world feel more lived in, so I'm going to be grabbing this the moment it comes out!
I can't wait for this release. It will be the final stone in my "Fallout 4.5" modlist built around lore friendly, well balanced weapons, SS2, MAIM, Scourg and Fallout 2287. Btw all your other mods are already in my loadorder and are all amaizing ❤️❤️❤️
It would be cool to do the reverse for the lazer rifle, add a more ergonomic stocks. Got impression they were designed for powerarmor only, like the institute rifles to be honest.
It's always interesting to see what potential modders/programmers and graphic designers get out of Fallout 4, and what creative and clever things they come up with! Unfortunately, you can't say that about Bethesda! Why actually? Are they too lazy, unmotivated or fed up with the money? Sad !
42 Comments
The vanilla weapons just felt so bare minimum and bland. You and Pigness have really done an excellent job doing them justice with these!
This is going to become of of those staple mods. One that everyone adds to a fresh install and then forgets about because it integrates so well with the world
If you have enough time after completing the mod pack, do you think it would be possible to have a standalone add-on for the pipe weapons? Something like making the attachments, receivers and even the stocks and barrel look more professionally made the higher the gun-nut skill gets as if the user is getting a feel as to what the pipe weapon used to be before it ended up in a sorry state of poor craftsmanship?
Thanks man! I’m waiting for this! Keep up the work.
As an xbox user, this pack is a dream come true. I think this will be one of the only weapon mods I'll use other than animation replacers
Damn… Looking good!
I honestly never considered that laser sights could be used that way… Its a real game changer and I totally welcome this!
You should do something like turning pistols into rifles like you can do with the pipe pistols I only have xbox series x so it would be the first mod of its kind if you did that from what i saw
If you can create an add-on or just replace the receiver on the vanilla 10mm to look a bit more squared off I might stop using FriedTurkey's 10mm and switch to using yours ^.^
Dooood this is looking nice!! I've been wanting combat rifle and pistol attachments!!
I really like these so far. Stoked for the raider/scrap attachments.
I’m kinda curious if you’re going to add anything to the pipe guns, even though it’s hardly used.
Kudos for the "Spiked Compensator" looking like a meat tenderizer
Do you think you could add a snake shot receiver to the .44 pistol and/or Western Revolver? There aren't a lot of good shotgun pistols for people running the Gunslinger perk and I feel adding snake shot to the afore mentioned weapons would be appropriate.
10:52 Oh no! The Apache revolver!
Yessss I absolutely love the revolver stock mod. I can’t wait for all these mods to come out.
The only man that can get me to use vanilla weapons.
I imagine this will look great with the gunners outfit packs and mercenary outfit pack.
Would like to see your take on some New Vegas weapons like the service rifle and marksman rifle.
think with the laser stock we can get a laser mag that adds a drum mag inspired by the laser rcw? just convert a combat rifle into some laser thingy because you can
dude every new update you show us makes me even more pumped for the final release
Wow nice attachments for the 10mm. Hope you get them to work with those resize mods
Hey Dak, I was curious if there was any way I can talk to you privately about a mod project, it is not a request. I don’t know anyone personally in the modding community, but I’ve always been a fan of your channel and your mods, please consider talking with me, I’m sure it will not be a waste of time to you.
This is awesome Dak! I wonder if you will touch upon the laser and plasma rifle. Where you can finally turn it into a tri-beam rifle and classic laser pistol. For plasma turn it into the classic plasma pistol and multiples rifle.
Do these 10mm mods still work with any extended caliber mods?
I know it only appeared for like a split second of footage in Quincy Quarries but what is the Flora mod you are running?
Anyone: Why is the vanilla 10mm Pistol so massive?
Everyone: Because it's meant to be carried by Power Armored troops.
Me: Bruh… If you in Power Armor then WTF you carrying a pistol for? Chuck that glorified pea-shooter out and get a minigun ffs!
this mod is on nexus?
Honestly, I love the chunkier vision of the classic square 10mm (with long barrel).
Also, absolutely adore the CE Magnum vibes you guys gave it with the laser and the handguard
You’re doing godd howard’s work. Literally
On the laser sights…why didn't you use the laser sight on the bottom of the 10 mils large barrels at all? I was under the impression that those gas-tube looking things were simply laser sights that were out of batteries.
I dunno, maybe I'm crazy. But regardless, you're doing some good work. Happy to see you're still working on this mod. 🙂
Can you make a smaller version of the pistol? I find it too big
…'Green'… the 10mm Pistol is…'Green'? I'm not color blind, but saying that its green is making me doubt my life.
My only dissapointment with the 10mm in no full stock option to convert it into a SMG, but either way this looks amazing and will get me to use vanilla weapons for once
big fan of the massive 10mm! i always try to make the 10mm the size of a small rifle with those vanilla parts, and the idea i could make it even bigger… super exciting.
Those 10mm mods are absolutely beautiful! I'm hoping this bring some life to the drab 10mm pistol, maybe make it more viable in later game.
BTW, minigun laser sight is top tier!
I absolutely love the idea of the junk part mods. that way you're not just jumping straight from pipe weapons to pristine prewar antique guns. I think it'll do a great job to make the world feel more lived in, so I'm going to be grabbing this the moment it comes out!
If you use the new receiver, you will get a .44 10mm pistol…
I can't wait for this release. It will be the final stone in my "Fallout 4.5" modlist built around lore friendly, well balanced weapons, SS2, MAIM, Scourg and Fallout 2287.
Btw all your other mods are already in my loadorder and are all amaizing ❤️❤️❤️
This is looking Awesome! Can't wait for the mod or the next update video.
Awesome.
Any chance of using MTs-255 animations with that revolver rifle?
It would be cool to do the reverse for the lazer rifle, add a more ergonomic stocks. Got impression they were designed for powerarmor only, like the institute rifles to be honest.
Any idea when this will be finished?
It's always interesting to see what potential modders/programmers and graphic designers get out of Fallout 4, and what creative and clever things they come up with! Unfortunately, you can't say that about Bethesda! Why actually? Are they too lazy, unmotivated or fed up with the money? Sad !